Skip to content

Direct factory access — Trade only · Worldwide delivery

Bathroom & Spa supplier

Maison Dino — Trade only

Bathroom & Spa supplier

45 bath references

Freestanding and hydromassage baths for hotels, spas and residences — reinforced acrylic shells, made to order, sized to the room they go into.

A bathroom is judged in ten seconds

A guest walks into the bathroom before unpacking. The 45 references in this family are baths, from compact models of 120 by 120 cm for a city room to pieces of 180 by 120 cm for a suite. One order covers several room categories in the same finish, instead of asking two suppliers to agree on the same white.

Acrylic, brass, and what holds it up

Shells are reinforced acrylic of 3 to 3.2 mm, on a reinforced frame or fibreglass. Taps and jets exist in chromed brass, matt black brass or chrome, handles in stainless steel, aprons in acrylic or tempered glass. Empty weights on file run from 95 to 140 kg, and that is the figure your structural engineer asks for first.

Jets, drain, and the door it has to pass

Part of the range carries a pump with five, six or eight jets, which changes the electrical supply and the maintenance access to plan for. Send the room dimensions, the door opening and the position of the drain. Those three points decide what can be installed before anything is ordered, and we answer with a written quote and a call back within 2 business hours, 9:00 to 18:00 Paris time.


Frequently asked questions

Are these baths freestanding or built in?

The family is built around freestanding baths, most of them with their own apron. Several models take a clear or smoked tempered glass panel instead of an acrylic one. Tell us whether the bath sits against a wall or in the open, because the finished side changes with that position.

How much does a bath weigh on the floor?

Empty weights on file run from 95 to 140 kg depending on the model, and water and a bather are added to that. The person who validates a floor load is your structural engineer, not us. Ask for the empty weight and the capacity of the models you are considering, both are on file, and hand them over before the room is specified.

What are the shells made of?

Reinforced acrylic of 3 to 3.2 mm on a reinforced frame or fibreglass. Taps and jets come in chromed brass, matt black brass or chrome, handles in stainless steel, drain and overflow in zinc alloy. The exact composition is written on each product sheet rather than promised for the whole range.

Which models have hydromassage?

Part of the range carries a water pump with five, six or eight jets. That choice changes the electrical supply, the maintenance access and what your technical team has to plan. Name the models you are considering in the quote request and we confirm in writing what each one carries.

Can dimensions be adapted to the room?

Dimensions on file run from 120 by 120 cm to 180 by 120 cm, with heights between 52 and 65 cm. Every piece is made to order, so dimensions and finishes are discussed model by model. Send the door opening and the free area of the bathroom, and we confirm what actually passes before you order.

Do you also supply basins, shower trays and screens?

This family covers baths. Taps are supplied with the models that carry them. Basins, shower trays and screens are not referenced today. Ask for them in your quote request rather than assuming they exist, and we answer in writing.

Can one order cover the bathrooms of an entire floor?

Yes, and repetition is exactly the point. Give the number of rooms, the model per room category and the destination country. The quote states what applies to that quantity, and we call you back within 2 business hours, 9:00 to 18:00 Paris time.


The full Bathroom & Spa collection is reserved to trade partners.